How To Recone A Subwoofer?


If you have ever heard a rattling noise coming from your subwoofer, it could be time to consider reconing. Reconing is a process that takes the old subwoofer cone and transfers it to a new subwoofer. This process will fix any rattling noises, and the speaker will sound as good as new. Reconing is fairly easy to do, but you will need to have some specific tools. You will need to remove the old cone from the subwoofer, place the new cone in the subwoofer, and use a bonding agent to attach the cone to the new subwoofer. You will also need to attach the new speaker wires to the new cone and connect it to the subwoofer. Once this is done, you will need to turn on the subwoofer and make sure that there are no more rattling noises.

Recone kits are designed to repair blown speakers and extend the life of a subwoofer. They typically come with a subwoofer cone, foam, and fabric. In order to recone a subwoofer, it is important to clean the subwoofer cone and foam. To do this, use a damp cloth to wipe the foam and the cone. The fabric should be cut to size and used to wrap the cone and the foam. Then, put the cone back on the speaker. Next, wrap the cone with the fabric. Finally, tie off the fabric and tighten it around the cone to hold it in place.

Recone kits are essential for fixing subwoofers. With a recone kit, you can easily fix a subwoofer that has blown out or cracked. You can use a recone kit to fix just about any type of subwoofer. It is easy to install, and you can use it to repair a wide variety of subs. It is essential for any home audio enthusiast or professional.

If you want to recone your subwoofer, the first thing you need to do is make sure you have the right supplies. For example, you will need the recone kit, which includes the cone, gasket, and screws. You will also need a Phillips head screwdriver and wire cutters. After you have all of these supplies, you will need to find a comfortable place to work. You will also need to remove the old cone and gasket. After this, you will need to measure the size of the cone and cut it to size. You will then place the cone in the recone kit and screw it into place. The next step is to measure the gasket and cut it to size. You will then place the gasket in the recone kit and screw it into place. Finally, you will need to screw the gasket onto the subwoofer frame.

When a subwoofer is damaged, the sound will no longer be as crisp and powerful as it once was. A recone kit is an affordable and effective way to repair the subwoofer. The kit includes all the materials needed to re-coned the subwoofer. It also includes instructions on how to re-coned the subwoofer.

First, remove the damaged cone and place it in the provided bag. Use the included screwdriver to remove the screws from the basket. Remove the basket and place it in the provided bag. Carefully remove the dust cap from the front of the basket. Place the new cone on top of the basket and use the included glue to seal it in place. Re-install the basket, using the screws and screwdriver. Install the dust cap on top of the basket.

This is a how-to article on how to recone a subwoofer. Reconing a subwoofer is a difficult process that requires the user to have experience with electrical wiring and have the proper tools for the job. First, the user must remove the old cone from the subwoofer. The cone can be removed by heating it with a heat gun and then peeling it off. Next, the user must sand the cone, cone-adapter, and the surround. After that, the user must solder the wires together and attach them to the new cone. The cone must then be heated with a heat gun to attach it to the cone-adapter. Finally, the user must attach the new surround to the subwoofer and test it out.

About The Author

Hi, I’m Simon Franklin, founder of I love to play a lot with audio & music equipment. I test different sound & music gear to make my sound quality better. Each guide and review on this website has been approved by me to give you the right information.